FEROS Mounting Procedures
FEROS Mounting Procedure At the Dome and after MEC performed the WFI Dismount.
- Remove baffle.
- Place the FEROS Adapter underneath the cell.
- Lift the plattaform carefully, make sure all cables and FIBER are safe.
- Unscrew the bolts, use your hands do not use a screw driver.
- Install the 3 guide pins, at 120 degrees.
- CAREFULLY MEC and Optics should now install the FEROS Adapter.
- Tighten using 6 bolts.
- Remove guide pins.
- Lower the FEROS cart.
- Unscrew the 3 bronze legs from the adapter.
- Lower the plattform, be extra carefull about the FEROS FIBER.
Now proceed to Mount the WFI.
- Connect fiber on ace box, be carefull with the numbering.
- Connect cooling hoses.
- Connect TCCD cable 1 (small one).
- Connect TCCD cable 2 (small one).
- Remove protective connector from PATCH.
- Connect TCCD cable 3 (bigger one).