Complex Type Summary |
allocationSettings |
Resource allocation settings.
|
asynchronousPublisherQosPolicy | <<RTI Extension>> This QoS policy is used to enable or disable asynchronous publishing and asynchronous batch flushing for the Publisher. |
availabilityQosPolicy |
<<RTI Extension>>
|
builtinTopicReaderResourceLimits | <<RTI Extension>> Built-in topic reader's resource limits. |
BulkDataNTReceiverType | |
channelSettings |
Type used to configure the properties of a channel.
|
channelSettingsSeq |
Declares a sequence of elements, which correspond to different ChannelSettings_t
entities.
|
databaseQosPolicy |
<<RTI Extension>>
The DATABASE QoS policy configures the internal "database"
(thread and data structures)
used by RTI Data Distribution Service to hold information about locally created
DDS entities and remote entities that are discovered through the discovery process.
|
dataReaderProtocolQosPolicy |
<<RTI Extension>>
Protocol that applies only to DataReader instances.
|
datareaderQos |
QoS policies related to DataReaders.
|
datareaderQosProfile |
This profile groups the QoS policies related to DataReaders.
|
datareaderQosProfileChild |
This profile groups the QoS policies related to DataReaders.
|
dataReaderResourceLimitsQosPolicy |
<<RTI Extension>>
Resource limits that apply only to DataReader instances.
|
dataWriterBatchQosPolicy |
<<RTI Extension>>
This QoS policy can be used to decrease the amount of
communication overhead associated
with the transmission and (in the case of reliable communication) acknowledgement
of small samples in order to increase throughput.
|
dataWriterProtocolQosPolicy |
<<RTI Extension>>
Protocol that applies only to DataWriter instances.
|
datawriterQos |
QoS policies related to DataWriters.
|
datawriterQosProfile |
This profile groups the QoS policies related to DataWriters.
|
datawriterQosProfileChild |
This profile groups the QoS policies related to DataWriters.
|
dataWriterResourceLimitsQosPolicy |
<<RTI Extension>>
Resource limits that apply only to DataWriter instances.
|
DDSReceiverFlowQoSType | |
DDSReceiverStreamQoSType | |
deadlineQosPolicy | On a DataWriter, this QoS policy states the maximum period in which the application expects to call write() on the DataWriter, thus publishing a new sample. |
destinationOrderQosPolicy |
This policy controls how each subscriber resolves the final value of a data instance that
is written by multiple DataWriters.
|
discoveryConfigQosPolicy | <<RTI Extension>> The DISCOVERY_CONFIG QoS policy is used to tune the discovery process. |
discoveryQosPolicy |
<<RTI Extension>>
The DISCOVERY QoS configures how DomainParticipants discover each other on the
network.
|
domainparticipantfactoryQos |
QoS policies related to DomainParticipantFactory.
|
domainparticipantfactoryQosProfile |
This profile groups the QoS policies related to DomainParticipantFactory.
|
domainparticipantfactoryQosProfileChild |
This profile groups the QoS policies related to DomainParticipantFactory.
|
domainparticipantQos |
QoS policies related to DomainParticipants.
|
domainparticipantQosProfile |
This profile groups the QoS policies related to DomainParticipants.
|
domainparticipantQosProfileChild |
This profile groups the QoS policies related to DomainParticipants.
|
domainParticipantResourceLimitsQosPolicy | <<RTI Extension>> The DOMAIN_PARTICIPANT_RESOURCE_LIMITS QoS policy configures the resources used by a DomainParticipant. |
domainParticipantWireProtocolQosPolicy | <<RTI Extension>> The WIRE_PROTOCOL QoS policy configures some Real-Time Publish Subscribe (RTPS) protocol-related properties for the DomainParticipant. |
durabilityQosPolicy |
The Durability QoS policy controls whether or not, and how,
published samples are
stored by the DataWriter application for DataReaders that are found after the samples
were initially written.
|
durabilityServiceQosPolicy |
This QoS policy is only used if the DURABILITY QoS policy is
PERSISTENT or TRANSIENT
and you are using RTI Persistence Service, an optional product which may be
purchased separately.
|
duration |
Time specified in seconds and nanoseconds
|
durationAuto |
Time specified in seconds and nanoseconds
|
encapsulationIdSeq |
Declares a sequence of encapsulations.
|
endpointGroup |
Endpoint groups are identified by a role_name and a quorum_count.
|
endpointGroupSeq |
Declares a sequence of elements, which correspond to different EndpointGroup_t
entities.
|
entityFactoryQosPolicy |
The Entity Factory QoS policy is a mechanism whereby a user can indicate whether entities
should be automatically enabled upon creation by their factory or whether
enabling should be deferred to a later time of the user's own choosing.
|
entityNameQosPolicy | <<RTI Extension>> The purpose of this QoS is to allow the user to attach naming information to created Entity objects. |
eventQosPolicy | <<RTI Extension>> The EVENT QoS policy configures the internal RTI Data Distribution Service Event thread. |
exclusiveAreaQosPolicy | <<RTI Extension>> This QoS policy controls the creation and use of Exclusive Areas. |
groupDataQosPolicy | This QoS policy provides an area where your application can store additional information related to the Publisher and Subscriber. |
historyQosPolicy |
This QoS policy configures the number of samples that RTI
Data Distribution Service will
store locally for DataWriters and DataReaders.
|
inetAddressSeq |
A sequence of elements with valid IP addresses.
|
latencyBudgetQosPolicy |
This QoS policy is used to suggest the maximum acceptable delay that is acceptable
between when data is written and when data is received.
|
lifespanQosPolicy | The purpose of this QoS is to avoid delivering stale data to the application. |
livelinessQosPolicy | The LIVELINESS QoS policy specifies how RTI Data Distribution Service determines whether a DataWriter is "alive". |
loggingQosPolicy |
<<RTI Extension>>
The Logging QoS policy configures the NDDS Config Logger.
|
multiChannelQosPolicy | <<RTI Extension>> This QoS policy is used to partition the data published by a DataWriter across multiple channels . |
nonNegativeIntegerSeq |
A sequence of elements of non-negative integers
|
ownershipQosPolicy | The OWNERSHIP QoS policy specifies whether a DataReader will see changes to an instance of a Topic from multiple DataWriters. |
ownershipStrengthQosPolicy |
The OWNERSHIP_STRENGTH QoS policy is used to rank DataWriters
of the same
instance of a Topic, so that RTI Data Distribution Service can decide which DataWriter will
have ownership of the instance when the OWNERSHIP QoS policy
(Section 6.5.13) is set
to EXCLUSIVE.
|
partitionQosPolicy | The PARTITION QoS provides another way to control which DataWriters will match and thus communicate with which DataReaders. |
presentationQosPolicy |
Since data samples are sent independently over networks that may deliver packets out
of order, the PRESENTATION QoS policy allows you to control
how a Subscriber sorts
and orders the received samples in the DataReader's queue.
|
propertyQosPolicy | <<RTI Extension>> The PROPERTY QoS policy can be used to associate a set of properties in the form of (name,value) pairs with a DataReader, DataWriter, or DomainParticipant. |
propertyValue |
Properties are name/value pairs objects.
|
propertyValueSeq |
Declares a sequence of elements, which correspond to different Property_t
entities.
|
publisherQos |
QoS policies related to Publishers.
|
publisherQosProfile |
This profile groups the QoS policies related to Publishers.
|
publisherQosProfileChild |
This profile groups the QoS policies related to Publishers.
|
publishModeQosPolicy | This QoS policy determines the DataWriter's publishing mode, either asynchronous or synchronous. |
qosLibrary | The Qos Library provides a way to group a set of related QoS under a namespace. |
qosProfile |
A QoS profile groups a set of related QoS.
|
readerDataLifecycleQosPolicy |
This policy controls the behavior of the DataReader with regards to the lifecycle of the
data instances it manages, that is, the data instances that have been received and for
which the DataReader maintains some internal resources.
|
ReceiverFlowType | |
receiverPoolQosPolicy |
<<RTI Extension>>
The RECEIVER_POOL QoS policy configures the internal RTI Data
Distribution Service
thread used to process the data received from a transport.
|
ReceiverStreamType | |
reliabilityQosPolicy |
This RELIABILITY QoS policy determines whether or not data
published by a
DataWriter will be reliably delivered by RTI Data Distribution Service to matching
DataReaders.
|
resourceLimitsQosPolicy | The RESOURCE_LIMITS QoS policy controls the memory resources that RTI Data Distribution Service allocates and uses for DataWriter or DataReader. |
rtpsReliableReaderProtocol | QoS related to reliable reader protocol defined in RTPS. |
rtpsReliableWriterProtocol | QoS related to the reliable writer protocol defined in RTPS. |
rtpsWellKnownPorts | RTPS well-known port mapping configuration. |
sequenceNumber |
Sequence number specified in high and low, or as a 64-bit decimal value
|
stringSeq |
Declares a sequence of elements, which correspond to different xs:string.
|
subscriberPresentationQosPolicy |
Since data samples are sent independently over networks that may deliver packets out
of order, the PRESENTATION QoS policy allows you to control
how a Subscriber sorts
and orders the received samples in the DataReader's queue.
|
subscriberQos |
QoS policies related to Subscribers.
|
subscriberQosProfile |
This profile groups the QoS policies related to Subscribers.
|
subscriberQosProfileChild |
This profile groups the QoS policies related to Subscribers.
|
threadSettings |
The properties of a thread of execution.
|
timeBasedFilterQosPolicy |
This TIME_BASED_FILTER QoS policy allows you to specify that
data should not be delivered more than once per-specified
period for each data instance, regardless of how fast
DataWriters are publishing new samples of the data instance.
|
topicDataQosPolicy | This QoS policy provides an area where your application can store additional information related to the Topic. |
topicQos |
QoS policies related to Topics.
|
topicQosProfile |
This profile groups the QoS policies related to Topics.
|
topicQosProfileChild |
This profile groups the QoS policies related to Topics.
|
transportBuiltinQosPolicy | <<RTI Extension>> The TRANSPORT_BUILTIN QoS policy specifies which built-in transports can be used by the DomainParticipant. |
transportEncapsulationQosPolicy |
<<RTI Extension>>
This QoS policy allows you to associate encapsulation formats
to transport destinations.
|
transportEncapsulationSettings |
Type representing a list of transport encapsulations associated to a set of transports.
|
transportEncapsulationSettingsSeq |
Declares a sequence of elements, which correspond to different TransportEncapsulationSettings_t
entities.
|
transportMulticastMapping |
Type representing a list of addresses associeted with a topic expression.
|
transportMulticastMappingFunction |
Type representing a function defined into an external library.
|
transportMulticastMappingQosPolicy | <<RTI Extension>> The MULTICAST_MAPPING QoS policy allows you to specify a list of multicast addresses to be used by DataReaders for receiving messages. |
transportMulticastMappingSeq |
Declares a sequence of elements, which correspond to different TransportMulticast_t
entities.
|
transportMulticastQosPolicy |
<<RTI Extension>>
This QoS policy allows you to specify network multicast
addresses to be used by
DataWriters when sending data samples to this DataReader.
|
transportMulticastSettings | Type representing a list of multicast locators. |
transportMulticastSettingsSeq |
Declares a sequence of elements, which correspond to different TransportMulticastSettings_t
entities.
|
transportPriorityQosPolicy |
The TRANSPORT_PRIORITY QoS policy allows the user application
to take advantage
of transports that are capable of sending messages with different priorities.
|
transportSelectionQosPolicy |
<<RTI Extension>>
The TRANSPORT_SELECTION QoS policy allows you to select the
transports that have
been installed with the DomainParticipant to be used by the DataWriter or DataReader.
|
transportUnicastQosPolicy | <<RTI Extension>> The TRANSPORT_UNICAST QoS policy allows you to specify unicast network addresses to be used by DomainParticipant, DataWriters and DataReaders for receiving messages. |
transportUnicastSettings | Type representing a list of unicast locators. |
transportUnicastSettingsSeq |
Declares a sequence of elements, which correspond to different TransportUnicastSettings_t
entities.
|
typeSupportQosPolicy |
<<RTI Extension>>
|
userDataQosPolicy | This QoS policy provides an area where your application can store additional information related to a DomainParticipant, DataWriter, or DataReader. |
virtualGuid | The virtual GUID (Global Unique Identifier). |
writerDataLifecycleQosPolicy | This QoS policy determines if the DataWriter will dispose an instance when it is unregistered. |