Plot ? |
Symb ? |
Source * |
Average ? |
Thresholds ? |
N_ data |
QC1 parameter |
Data downloads |
Remarks |
method |
value |
unit |
method |
value |
1 |
| QC1DB |
MEAN |
1.17e+03 |
number |
none | |
126 |
N_AB_EXE |
all (full time range)
| KMOS 1. number of all executed det.ABs per month (CALIB only) |
1 |
o | QC1DB |
none |
|
number |
none | |
39 |
N_AB_EXE |
all (full time range)
| 1b. all executed ABs for IDPs (SCIENCE) per month |
2 |
| QC1DB |
MEAN |
17.9 |
hours |
none | |
126 |
T_AB_EXE |
all (full time range)
| 2. total AB processing time per month (hours) |
2 |
o | QC1DB |
none |
|
hours |
none | |
39 |
T_AB_EXE |
all (full time range)
| 2b. same for IDPs |
4 |
| QC1DB |
MEAN |
3.34 |
hours |
none | |
126 |
T_QC_EXE |
all (full time range)
| 3. total QC report execution time per month (hours) |
4 |
o | QC1DB |
none |
|
hours |
none | |
39 |
T_QC_EXE |
all (full time range)
| 3b. same for IDPs |
|
*Data sources: QC1DB: QC1 database; LOCAL: local data source
|
Plot 1 | data source: | monthly_stat (QC1 database) |
dataset: (numbers below apply to this dataset) | N_AB_EXE | |
mean: | 1.17e+03 | number |
thresholds: | none | |
N_data plotted: | 126 |
[click plot for closeup] |
Plot 2 | data source: | monthly_stat (QC1 database) |
dataset: (numbers below apply to this dataset) | T_AB_EXE | |
mean: | 17.9 | hours |
thresholds: | none | |
N_data plotted: | 126 |
[click plot for closeup] |
Plot 4 | data source: | monthly_stat (QC1 database) |
dataset: (numbers below apply to this dataset) | T_QC_EXE | |
mean: | 3.34 | hours |
thresholds: | none | |
N_data plotted: | 126 |
[click plot for closeup] |
This plot
This plot visualizes the monthly statistics of executed detector ABs
('det.ABs'):
- number of all successfully processed ABs
(before XXLight: successful CAL+SCI; with XXLight: successful CAL only),
- total execution time for ABs in hours
(pipeline processing),
- total QC report execution time in hours.
The significant drop in execution times in 2013-04 is caused by the migration to the muc machines,
with a significant gain in compute performance.
If applicable we have added metrics for IDPs. The initial peak refers to the
(re)processing of the entire historical batch.
The det.AB number refers to jobs per detector and is higher by a factor MEF_FACTOR
than the actual number of ABs as counted in the QC system and displayed in the
AB certification plot.
For reference, MEF_FACTOR=4 for
CRIRES and HAWKI; 16 for VIRCAM; 32 for OCAM; 3 for KMOS; 24 for MUSE. This number measures
the compute workload.
The numbers for AB_texec and QC_texec are the sum of execution times for all
processed ABs (including the failed ones), without further correction for
MEF_FACTOR.
Note: The latest data point in the current plot usually refers to a month which is not yet finished.
Its value will therefore continue to increase until a new last month starts.
General information
Click on any of the plots to see a close-up version.
The latest date is indicated on top of the plot.
If configured,
- data points belonging to the latest date are specially marked
- statistical averages are indicated by a solid line, and thresholds by broken lines
- outliers are marked by a red asterisk. They are defined as data points outside the
threshold lines
- "aliens" (= data points outside the plot Y limits) are marked by a red arrow (↑ or ↓)
- you can download the data for each parameter set if the 'Data downloads' link shows up
|